Current location:Home >  Products  >  Epoxy curing agent series
Products/
JHL-3015 High - strength plastic infiltration
      DetailsMore
      JHL-3015 High - strength plastic infiltration

      JHL-3015 is a modified epoxy resin stone infiltration adhesive. This product is mainly used for all kinds of marble, granite, jade dark cracks, cracks, chicken feet pattern, trachoma, osteoporosis, fracture defects such as penetration, Bonding. Better use of jade, jade can not only repair the dark cracks, jade can also be more transparent, effectively reduce the cotton-like.

      Product Features:

      ◆ low viscosity, easy operation, the amount of glue per unit area less.

      ◆ strong penetration, small dark cracks can penetrate.

      ◆ High bonding strength, the bond is not easy to break.

      ◆ good anti-yellowing performance, up to outdoor anti-yellowing standards.

      ◆ curing performance, low temperature curing can also be safe, no oil surface phenomenon.

      ◆ After curing layer of transparent, small shrinkage, water, oil, anti-aging.

      ◆ Department of epoxy AB glue, safe and environmentally friendly.


      The main technical and performance parameters:

      project   

      Typical values

      Exterior    

      A

      Colorless transparent liquid

      B

      Colorless transparent liquid

      Viscosity  

      A

      50~150cpas

      B

      40~80cpas

      Mixing ratio A: B  

      4∶1

      100 g cup gel time 

      30~45 

      25 ℃ curing time table dry / hard work  

      3h/6h/9h

      Solid content

      ≥95


      Product use method:

      ◆ Stone will be heated or sun drying to remove moisture, and keep the stone surface clean, to ensure that no dust and oil and other impurities.

      ◆ A, B components according to the weight ratio of A: B = 4: 1 (volume ratio: A: B = 4: 1.2), the deployment of uniform, is honored with, be sure to use within 10-15min.

      ◆ In order to achieve better penetration effect of the product, can be baked at the cracks in the board, with the extension of the product to dry cracks at the drop coating. For large cracks can be added to the amount of the stone powder in the cracks and then sizing.

      ◆ glue layer surface dry, either stacking, polishing, polishing and other hard work.


      Product use Note:

      ◆ The sizing of the strains should be completely according to the weight ratio of A: B = 4: 1 (volume ratio of 4: 1.2) the proportion of deployment to ensure the best coating the best results.

      ◆ Prohibited A, B ratio cup mixed use, should be used immediately after a good glue bottle.

      ◆ A, B glue must be mixed evenly, so as not to affect the use of results.

      ◆ a plastic should not be too much time, the amount of plastic may be due to fast response and the filling period is slightly shortened, a good tune the glue must be used within the period of use (start to become hot or sticky can not be used, so as not to affect Penetration and cohesion), the deployment of a good plastic should be a one-time run out.

      ◆ For color, color paste to join the A glue, but the amount should not be too much, it is best to use a dedicated epoxy paste, so as not to affect the bonding effect.

      ◆ Keep the construction site well ventilated, do the necessary labor protection, if accidentally splashed into the eye glue, the first rinse with plenty of water, seek medical attention immediately.


      Packaging, transportation and storage:

      1, packaging 25KG iron or plastic packaging specifications.

      2, the transport process should be rain, sun, to prevent damage to the packaging, moisture.

      3, stored in a cool dry place, away from fire, strong acid, alkali and strong oxidants.

      4, in accordance with the provisions of the transport and storage conditions, from the date of production from the storage period of 6 months.

      5, JHL-3015 for non-dangerous goods, according to the general merchandise disposal.

      6, the color is gradually deepening during storage is a normal phenomenon, does not affect the use of results. After opening the use of packaging barrels should be tightly closed lid, to avoid long-term exposure to air.


      Special Note:

      The Company of the above data and text description are from sincerity, but I do not know whether it is suitable for your company's construction technology and use. Therefore, please use this product before the samples from the Company to obtain the test, if you have any questions, please feel free to contact the Company.