‍

JHL-4011 is a modified epoxy resin stone back mesh designed to enhance the use of marble, granite stone back mesh and granite back bolt anti-cracking.

Product Features：

‍

◆ Adhesive firmly.

◆ good toughness.

◆ curing performance, low temperature curing phenomenon does not appear oil.

◆ Department of epoxy AB glue, safe and environmentally friendly.

The main technical and performance parameters:

Product use method:

‍

◆ sizing surface should be kept clean, dry, no water stains, dust and oil, should try to keep the sizing surface at 25 ℃ or more.

◆ A component and B component by weight ratio A: B = 4: 1 to deploy even with cash, in 10 ~ 15 min to complete.

◆ glue layer surface dry, either stacked, the next process, grinding and polishing, to be such a layer of hard work.

Product use Note:

◆ The sizing of the strains should be completely according to the weight ratio of A: B = 4: 1 ratio of deployment to ensure the best coating the best results.

◆ time should not be too much time to adjust the plastic, glue the number of more likely to be due to fast response and slightly shortened the pot life. To 25 ℃ when used within 15 minutes is appropriate, the deployment of a good plastic should be used once

◆ The workshop should be well ventilated. This product may stimulate the skin of some people, when the glue should do a good job of labor protection, glue splashed on the skin should be immediately rubbed with acetone or advanced hand sanitizer, then rinse with water, when splashed into the eyes, the application of large amounts of water Rinse and seek immediate medical attention.

◆ This product should try to keep the adhesive surface dry, such as dry lines have been built, can still be short-term drying, such as stone and substrate surface drying and then coating construction.

◆ When the ambient temperature is too low, the glue will thicken and slow down the curing speed, can be heated by A glue on the stone to warm or improve the temperature of the construction environment to make glue thinning, and thus speed up the curing speed. It is worth noting that: the glue of the ideal curing temperature of 25 ℃ ~ 75 ℃; when the temperature is too low in winter, as far as possible heating and curing (such as a drying line has been built for a short time baking, or gas guns The stone surface for a short time baking), will get a better curing effect.

◆ The components of the product should be sealed and stored in a cool warehouse, to avoid direct sunlight, the opening of the A plastic and B plastic Do not cover the wrong lid.

Packaging, transportation and storage:

1, the packaging has 20kg / group, 250kg / set of iron or plastic packaging specifications.

2, the transport process should be rain, sun, to prevent damage to the packaging, moisture.

3, in a cool dry place to avoid direct sunlight, away from fire, strong acid, alkali and strong oxidants.

4, in accordance with the provisions of the transport and storage conditions, from the date of production from the storage period of 12 months.

5, JHL-4011 for non-dangerous goods, according to the general merchandise disposal.

6, the color is gradually deepening during storage is a normal phenomenon, does not affect the use of results. After opening the use of packaging barrels should be tightly closed lid, to avoid long-term exposure to air.

Special Note:

The Company of the above data and text description are from sincerity, but I do not know whether it is suitable for your company's construction technology and use. Therefore, please use this product before the samples from the Company to obtain the test, if you have any questions, please feel free to contact the Company.